I ran some more tests on the microcon and nanosep filtration systems at 21.36psi (4000RPM) and 194.65psi (12,000RPM). Both are rated for forces up to 14,000 time gravity which is about 340psi but after talking to Tom we thought it…

Below is an optical image that shows the amount of area loss caused by the preferential EDP etch. Based on these numbers, our most recent membrane slits measure 115 um x 2014 um.

I found a small mistake in my calculations of the air permeability.Corrected data is in the graph below.

Today I looked at 3 more wafers: w158 (9/7/07) – some pinholes, overwhelming amount of very fine debris, not cbs as far as I can tellw160 (9/7/07) – some pinholes, debris, no cbsw171 (9/26/07) – many pinholes, lots of debris,…

Two simple diffusion separations were performed before break using membranes from wafers 205 and 213 (locations unknown as these were salvaged/misplaced chips). I ran the samples I collected on a 10% SDS-PAGE gel today. It seems that the membranes were…

There is strong evidence that the recent pinhole breakout is due to copper contamination in our process. I have attached two image – An SEM showing a cuprous creature eating one of our membranes and an EDX (Energy Dispersive X-ray?)…

Just in case you missed this one: www.nature.com.ezp.lib.rochester.edu/nnano/journal/v2/n11/full/nnano.2007.354.html This article makes the the previous papers seem mundane. It has inspired me though – maybe we can create a computer simulation that will demonstrate that pnc-Si membranes will dance and sing…

I stripped and viewed samples from wafers 186, 185, 184 and 182. None of these samples had cigarette burns. Follow this link to the updated summary: cb_report Previously I had noticed cigarette burns (small ragged pinholes) on samples from wafers…

This is a 12% SDS-PAGE gel of the human albumin (alb) and cytochrome c (cyt c) EQ tests. Both alb and cyt c passed through the membrane, while the cyt c impurity (middle band) and alb impurities (high bands) did…