Because I’ve been having such a difficult time measuring consistent zetapotentials (a big and heartbreakingly inconclusive post on those efforts is forthcoming) I decided to use one of my silver-coated SNMs as an EO pump and see if changing the…
Because I’ve been having such a difficult time measuring consistent zetapotentials (a big and heartbreakingly inconclusive post on those efforts is forthcoming) I decided to use one of my silver-coated SNMs as an EO pump and see if changing the…
Please plan accordingly and be sure all moveable items are off the floor the night before.
Cindy Hartnett – professor of mechanical engineering at Louisville requested some pnc-Si chips after reading our PNAS paper. In requesting the material she mentioned … I’ve long been searching for a low-voltage way to drive some micro-actuators. Electrokinetic pumps looked…
SU-8 3010 has been used to create a scaffold in the fabrication of the liftoff membranes. The supplier of the negative resist, MicroChem, rates it for a 13 moth shelf life. We were having difficulty achieving good liftoff with membranes…
In April of last year, I spent a considerable amount of time trying to visualize protein separations using SDS-PAGE (Sodium Dodecyl Sulfate-PolyAcrylamide Gel Electrophoresis) gels, and ultimately was able to get some data: I was trying to show that 15…
Previous posts: Theory Deposition Etching Imaging First Freestanding Membranes I had previously made free-standing nanomembranes that were mostly MgF2 according to the EDAX scan of the freestanding region: I hoped to duplicate my results and send over a few more samples to Nottingham. With…
(Meghan Kazanski actually did all the work, but she didn’t have a login when this post was started.) The calculated porosity is 16.4 % with an average pore diameter of 417 nm. SepCon assembly was performed with chips from…
The following data is from analysis of Wafer #1059, consisting of 30nm pnc-Si with 7% porosity and an average pore diameter of 28nm. Square window sizes with sides lengths of 0.1mm, 0.3mm, 0.5mm, 0.7mm, and 0.9mm were tested. For 1.1mm…
Over winter break I put together some posters to hang up in the lab. I tried to represent in an clever way a few key areas of research that NRG is interested in: If anyone has any ideas for…
The overall aim of the small animal dialysis is to evaluate the dialysis membranes and compare their urea clearance to commercial materials. The specific aim of this study was to go through the process of ordering and receiving rats, setting…