I found some good descriptions of hemodialysis experiments using rats. They all use a method possibly first described by (Rockel et al., 1978). (Galons, Trouard, Gmitro, & Lien, 1996) at U of Arizona used nephrectomized male Spraque-Dawley rats (Holtzmann Co.,…
Tag: testing
Long Term Urea Clearance in 100% Serum
I ran a 30 hour urea clearance with 100% serum through the single slot dialysis device. The now standard protocol was run. The single slot chip was annealed in the RTP for robustness then clamped into the acrylic/PDMS flow fixture.…
Wafer Testing: W520, 558, 559
I recently received three pinhole-ridden wafers for cell-related experiments. All three have been RTPed at 800C for 5 minutes in argon, which is the typical procedure we have been using for cell culture. The bursts pressures for each wafer are…
W567 Burst Pressure and Air Permeability
I recently received wafer 567 from Dave for cell culture work. It has many intact membranes but is riddled with pinholes, having only 3 pinhole-free samples. I decided to test them for air permeability and burst pressure, shown below. I…
