The goal of this set of experiments was to study the growth rate of cells in 3 different media; 1. Complete Media 2. Exosome Free Media 3. Serum Free Media. We studied the effect of media on both ADSCs and…
The goal of this set of experiments was to study the growth rate of cells in 3 different media; 1. Complete Media 2. Exosome Free Media 3. Serum Free Media. We studied the effect of media on both ADSCs and…
This post is an accumulation of the results obtained from my research thus far. To recap, my intent (for my masters thesis) is to provide context for critical flux optimization in NPN microfluidic devices, particle capture, and compare critical flux…
Introduction As part of my thesis, I have been working on developing an assay for measuring vascular barrier properties within our microfluidic devices. Traditionally, small molecule permeability measurements are performed on cells plated in a Transwell cup. The basic protocol…
Introduction Aline and SiMPore are producing devices at much higher manufacturing rates than we were capable of in the McGrath lab. In order to verify that these manufactured devices are capable of growing cells and allowing for cell survival, live/dead…
Introduction Motivation: We want to assess if the bladder cancer cell line T24 would influence the baseline characteristics of bladder epithelial cells (BdEC, a.k.a. ATCC® PCS-420-010™) when the two cell types are cultured together. Ultimately, we are interested if the T24…
Introduction Motivation: We want to assess if the bladder cancer cell line T24 would influence the baseline characteristics of bladder epithelial cells (BdEC, a.k.a. ATCC® PCS-420-010™) when the two cell types are cultured together. Ultimately, we are interested if the T24…
One advantage of our slot nanomembranes is that we can readily image microparticulate debris with simple light microscopy. With that in mind, it should be straightforward to have some image processing along with our microspectroscopy to separate out different particles…
Tom came up with this idea of using these membrane with precise thickness and pore size control to obtain a critical thickness and pore size, beyond which neutrophils cannot go transmigrate. N-Formylmethionyl-leucyl-phenylalanine (fMLP) was used in the lower channel to…
Parylene-C is a biocompatible, inert, FDA-approved and nondegradable material, which can be used to fabricate mechanically robust thin membranes. Parylene is used in the medical device industry for coating implantable devices and in the microelectronics industry as insulator. Furthermore, it…
Introduction: Fibroblasts: Dermal fibroblasts are cells within the dermis layer of skin which are responsible for generating connective tissue and allowing the skin to recover from injury. A fibroblast is a type of biological cell that synthesizes the extracellular matrix and collagen, produces the…